Prime Resins

Floor repair, joints & protective coatings

Pre-packed polymer modified cementitous concrete repair mortar for the reinstatement of defective concrete.

  • blank
  • Product
  • Description
  • TDS

Products

Description

A heavy duty, semi-rigid hybrid polyurea joint filler designed to fill and protect concrete joint edges and prevent sidewall spalling and chipping due to forklift or other traffic. This is 100% solids, two-component hybrid polyurea product, and it is traffic ready in one hour. Protects concrete joint edges and preventing sidewall spalling and chipping. Fills random cracks in concrete floors and walls. Protects cold storage or freezer floors down to -20°F (-29°C).

Description

Two-component, 100% solids, heavy duty, non-sag joint sealant. Sealing bell-and-spigot pipe joints in fiberglass conduits. Fast setting. Cures at temperatures as low as -17ºF (-27ºC). USDA approved.

Description

A heavy duty, semi-rigid epoxy joint filler designed to fill and protect concrete joint edges and prevent sidewall spalling and chipping due to forklift or other equipment traffic. This is a 100% solids, two-component resin. Heavy duty – will handle forklift traffic, easy 1:1 mix ratio, self-leveling, flows into joints as narrow as 1/16” and is USDA approved.

Description

Long pot life, medium viscosity, high strength bonding agent. Straw colored. Bond old concrete to new concrete in hot environments. Binder for epoxy mortar. Flowable consistency, excellent bond strengths and chemical resistance. Fast set time.

Description

An epoxy bonding agent that is a two-component, medium viscosity, high-strength epoxy designed for bonding new concrete to old concrete or mixing with dry sand to make a repair mortar. This fast-acting formulation cures tack-free about 45% faster than 3000 High Mod. Conforms to ASTM C-881 Type I, II, IV AND V, Grade 2, Class B and C.

Description

A two-component, medium viscosity, high-strength epoxy bonding agent designed to be used for bonding new concrete to old concrete or mixing with dry sand to make a repair mortar. Bonds new “plastic” concrete to existing concrete or steel and serves as a binder for epoxy repair mortar to overlay horizontal surfaces. Can be used for gravity feed of cracks in horizontal concrete and wood surfaces. Works well for bonding materials such as concrete, masonry, stone, wood, metal, etc. Capable of anchoring dowel bars, bolts, pins, etc. in horizontal surfaces.

Description

Two component urethane resin to mix with oven dry sand for a floor repair mortar that is ready in 10 minutes. Used for crack and spall repair for warehouse and industrial floors, including freezers. Used as a binder for repair mortar. Flowable consistency, excellent bond strengths and chemical resistance, and fast set time.

Head Office

  • 2291 Plunkett Road
  • Conyers
  • GA 30012
  • USA

 

UK Office

  • Kingston House
  • 3 Walton Road
  • Pattinson North
  • Washington

Connect with us