Seal leaks in concrete or masonry with crack injection and curtain grouting of our Prime Flex polyurethanes and AR acrylate resins. Prime Resins offers superior solutions for stopping leaks in every type of environment.
- blank
- Product
- Description
- TDS
- SDS
Products
Description
Acrylate, super low viscosity hydrophilic grout that produces elastomeric gel with variable set times. Low toxicity acrylamide substitute for leak seal and soil stabilization. Meets NSF/ANSI Standard 61 for potable water contact. 5 gallon pails, 50 gallon drums, and 300 gallon totes available. *Required TEA and SP sold separately
Description
Aquick and convenient method of stopping water seepage around pipe penetrations or around cable in conduit
Description
A super low viscosity acrylamide grout that yields a gel upon reaction. The grout solution is as thin as water, allowing PR10 ACLM to follow infiltrating water for sealing leaks or to deeply penetrate soils for soil stabilization. The gel time is adjustable from a few seconds to several hours. The cured grout provides an economical water barrier or soil stabilizer. Seal leaks in sanitary and storm water mainlines, pipe penetrations, laterals, lift stations and manholes. Stops leaks in tunnels and mines.
Description
Gushing leak repair kit
Description
Low viscosity, single-component, water activated, hydrophilic, flexible polyurethane. Meets NSF/ANSI Standard 61 for potable water contact.
Description
Hydrophobic single-component polyurethane, super low viscosity, water-activated to form a rock hard, watertight mass. requires catalyst.
Description
Hydrophobic, low viscosity, highly expansive, water activated polyurethane. Forms a watertight, rigid foam. Meets NSF/ANSI Standard 61 for potable water contact. Requires catalyst.
Description
Hydrophobic, super low viscosity, expansive polyurethane. Reacts with water, forms a watertight flexible foam.
Description
Two-component, hydrophobic polyurethane expansive foam to fill voids, stabilize soil, underseal concrete slabs. Low viscosity allows for moderate permeation effects as well. Available in 985 LX10 Fast when a very rapid reaction time is required (18 seconds).
Description
Two-component, low exotherm, polyurethane foam used to fill voids, stabilize soil and underseal concrete slabs. Its low viscosity allows for moderate permeation effects as well. Independently tested and verified to meet NSF/ANSI Standard 61.5 for contact with potable water. 985 LX20 Fast has the same features but with much faster reaction times.
Description
Two-component, closed cell, high density structural polyurethane foam in easy-to-use cartridges.
Description
Low viscosity, single-component, water-activated, multi-ratio hydrophilic gel/foam polyurethane.
Description
A rapid-setting concrete patching material designed to cut off water leaking through concrete or masonry surfaces. Recommended Uses include stopping water flow through concrete or masonry and being used in conjunction with Prime Flex products for a permanent solution. Set Times are 1-2 minutes for Prime Plug 1 (red top), 3-5 minutes for Prime Plug 2 (blue top), and 8-13 minutes for Prime Plug 3 (blue top).
Description
Description
PrimeCem MSM (Microsilica Mortar) is a blend of Portland cement, graded silica sand, fibers and silica fume. The mortar may be hand or spray applied. A nominal thickness of 1/4” up to 2”. Thicker applications can be achieved by applying in successive lifts. Uses include repairing concrete walls, ceilings, lining brick or concrete manholes and lift stations and horizontal pipe repair.
Description
PrimeCem CAM (Calcium Aluminate Mortar) is a blend of quartz silica, fibers and pure fused calcium aluminate cement. The mortar shall be hand or spray-applied. A nominal thickness of ½” up to 2” . Thicker applications can be achieved by applying successive lifts. PrimeCem CAM can be especially useful when coatings are required at early ages. CAM may be coated in as little as 12 hours. (Always consult with coating manufacturer).
Description
SoiLok MH is an extremely thin 2-component liquid resin designed specifically for manhole applications. SoiLok MH is a soil binding system (a subterranean grout) used to stabilize and bind loose soil or sand, stop underground water flows, and seal weeping leaks in manholes and other below grade structures.